Priming EMULSION WALLMIX UNIVERSAL designed to prepare absorbing mineral (brick, cement, gypsum and lime-cement surfaces, gypsum boards, ETC.) before performing finishing work (surfacing putty, tiling, construction of floors, sticking wallpaper, decorative, water-painting dispersion paints). Primer emulsion is intended for internal and external works.
WATER-POLYMER DISPERSION WITH MODIFYING ADDITIVES.
Carried out in accordance with the requirements of DSTU-N B A.3.1-23: 2013 and DSTU- N B B.2.6-212: 2016. The base must be dry, solid, and cleaned of dust, dirt, oil, fat, wax and paints. Weak surfaces must be removed.
When performing work, it is necessary to comply with the requirements of the current regulatory documentation.
WALLMIX UNIVERSAL primer emulsion should be applied with a brush or paint brush. Depending on the surface condition, it can be applied in one or two layers. The drying time of the primer depends in the temperature and humidity of the environment and takes approximately 4 hours.
After finishing work, the tool must be washed with water without allowing the primer to dry out.
All recommendations above are effective at +20 °C and 60% relative humidity. In the other conditions drying time can be different.
The consumption of the primer is ~0.15 – 0.25 l/m2, depending on the base and skills of the performer.
Protect eyes and skin while handling the product. In case of contact with eyes, immediately with water and seek medical attention.
The primer should be stored in a branded hermetically sealed packaging, in a dry place at temperature from +5 °С to +35 °С. Transporting in the plus temperature conditions. The shelf life is 12 months from the date of production indicated on the package.
Plastic buckets of 10L, 5L, 1L
The manufacturer is not responsible for the incorrect use of the material, as well as it is used for other purposes and conditions which are not mentioned in the technical description.
Due to continuous optimization if the primes, please refer to the technical description on the manufacturers website. From the point if appearance of the latest version of the technical description, all the previous ones become invalid.
DO NOT ALLOW FREEZING! 1.P.ZK DSTU B V.2.7-233: 2010 ADDRESS OF PRODUCTION: 02094, UKRAINE, KYIV, STREET MAGNITOGORSKA, 1. TEL .: (044) 501-55-12.g
|Film colour after drying||Transparent|
|Density of emulsion||~1,04 KG/L|
|Drying time||from 4 to 6 hours|
|Emulsion consumption||~ 0,15-0,25 l/m2|
|Substrate temperature during application||min 0.03 mg / (m x year x Pa)|
|Operating temperature||from -30 °C to +70 °С|